To determine the Throw Distance for where you should place your projector in the room, enter an image diagonal measurement number in the Image Size value box and hit the Enter key on your keyboard, or slide the Image Size slider back and forth until you find a number in the value box that represents the diagonal distance between the top right corner of your image screen and the bottom left corner of your image screen. On the graphical representation of a projector in the middle of the calculator, you will see dimension lines that will tell you the Throw Distance measurement between the front of the projector lens and the surface of your wall or screen.
If your selected projector has a Zoom Lens then the projector's Throw Distance or Image Size can be finely adjusted by moving the Zoom Lens ring on your projector. The Zoom Range slider in the calculator will help you calculate the changes made by a Zoom Lens. Using the blue padlock icons next to the Throw Distance value or Image Size value you can have the Zoom Range slider only affect one of the two controls.
If you press the blue padlock icon next to the Throw Distance value so that the icon shows a Lock symbol, then moving the Zoom Slider will only adjust the Image Size bigger or smaller as would be visually represented if you turned the Zoom Lens ring on your projector's zoom lens to make the image bigger or smaller.
If you click the padlock next to the Image Size value so that the icon shows a Lock symbol, then moving the Zoom Slider will only adjust the Throw Distance position of the projector in your room. The position of the projector in your room changes because you will need to move the projector closer or further away from the screen to maintain the same image size to match your screen when turning the zoom lens ring.
Reviews Projectors Screens Accessories. Control Panel Terminal Panel Wireless Remote Control Operating Range for the Remote Control Handling the Remote Control Setup Procedure Wiring Diagram Connecting to a Macintosh Computer Connecting to a Computer with a Digital Output Connecting to a DVD Player Connecting to a Stereo Amplifier Power On and Off modes Power Indicator When Using Power Management Function Selecting a Video Source Picture Size Picture Mode OSM Information Configuration Advanced Option Pin Assignment Limited Warranty This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock.
Therefore, it is dangerous to make any kind of contact with any part inside this unit. This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included.
Therefore, it should be read carefully in order to avoid any problems. Please see page 12 of this manual. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:.
Government Printing Office, Washington, D. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. Damage to the cord may cause shock or fire. The power supply cord you use must have been approved by and comply with the safety standards of your country. If a power cord is not supplied with this monitor, please contact your supplier. Please follow the bylaws or rules of your municipality to dispose of the tube properly.
Handle broken glass with care. Do not block ventilated openings or place the monitor near a radiator or other heat sources. Do not put anything on top of monitor. The monitor should be installed close to a power outlet which is easily accessible. Save packaging for transporting. It is recommended to wipe holes with a soft cloth a minimum of once per year.
Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions:. Blink often. Avoid using any cleaning solution or glass cleaner. Please handle it appropriately in case of disposal. Box , Santa Monica, California AV Denotes an AV unit function. To obtain the optional components and additional information, contact Customer Service at To avoid damaging the screen face, place the protective sheet on the table underneath the LCD.
The protective sheet was wrapped around the LCD in the original packaging. Make sure there is nothing on the table that can damage the monitor. This device cannot be used or installed without the Tabletop Stand or other mounting accessory. For proper installation it is strongly recommended to use a trained, NEC authorized service person. Failure to follow NEC standard mounting procedures could result in damage to the equipment or injury to the user or installer.
Product warranty does not cover damage caused by improper installation. Failure to follow these recommendations could result in voiding your warranty. NEC strongly recommends using screws M6 size and 10mm in length. If using screws longer than 10mm, check the depth of the hole. Fasten the LCD monitor to a wall using a cord or chain which is sufficient to support the weight of the LCD monitor approx. Before moving the LCD monitor, the cord or chain should be removed.
To prevent the use of the Main Power Switch, if desired, please attach the Main Power Switch cover which is included as an accessory. NOTE: With the main power switch cover in place, the main power switch can not be turned off. To turn the power off, remove the main power switch cover and turn off the switch, or remove the power cord from the AC Inlet at the back of the monitor. Selects which signal connected to the display is shown.
Acts as button to move the highlighted area up to select the adjustment with OSM menu. Receives the signal from the remote control when using the wireless remote control. See page 9. When the LCD is in power save mode, it will glow both green and red. See page A Sync-on-Green signal can be connected to the G connector.
Use only one input. If the remote control gets wet, wipe it dry immediately. Installing your LCD display must be done by a qualified technician. Contact your dealer for more information. Failure to follow this caution may result in injury if the LCD monitor falls. For PCs: Remove your current mouse and connect the serial cable from the remote mouse. For Macintosh: Remove your current mouse from your computer, attach the Macintosh adapter.
When the remote mouse receiver is installed, it will disable your regular mouse, disconnect the. NEC manuels. MultiSync MT
0コメント